7 * 24H consultation
Call us:+86 13724575770 / + 86 13620011767
Categories
Series ZN(5.0~50cc/rev)
Series ZN(5.0~50cc/rev)
Inlet: 1
Outlet: 1
Capacity: 5.0~50cc/rev
Working Pressure: ≤25Mpa
Working Temperature: ≤330℃ (Customizable for higher temperatures)
The temperature depends on the sealing ring material and pump body material
Rotational Speed: 5-40r/min
It should be used with reduced speed and pressure for high viscosity or non lubricating fluids
Application: Adhesive dispensing, Glue filling, Coating, Paints, Pressure increasing, Metering, etc
Main uses: Spinning of nylon, Polypropylene, Polyester, Carbon fiber, etc. (special media require replacement of pump body materials)
Outlet: 1
Capacity: 5.0~50cc/rev
Working Pressure: ≤25Mpa
Working Temperature: ≤330℃ (Customizable for higher temperatures)
The temperature depends on the sealing ring material and pump body material
Rotational Speed: 5-40r/min
It should be used with reduced speed and pressure for high viscosity or non lubricating fluids
Application: Adhesive dispensing, Glue filling, Coating, Paints, Pressure increasing, Metering, etc
Main uses: Spinning of nylon, Polypropylene, Polyester, Carbon fiber, etc. (special media require replacement of pump body materials)
| Modal | H | H1 |
| ZN-5.0cc/rev | 52.6 | 115.1 |
| ZN-10cc/rev | 60.5 | 123.0 |
| ZN-15cc/rev | 68.6 | 131.1 |
| ZN-20cc/rev | 76.7 | 139.2 |
| ZN-30cc/rev | 92.7 | 155.2 |
| ZN-50cc/rev | 125 | 187.5 |